-
Holding Magnets for Spread Anchors Positioning & Fixing
The holding magnets serve for positioning and fixing spread lifting anchors with steel formwork. Two milled rods are screwed into the magnetic plate body, to make the rubber basement easier when installing. -
Magnetic Plate Holder With Changeable Thread-Pin for Fixing Socket Magnet D65x10mm
The magnetic plate holders are produced to insert threaded sockets, sleeves to concrete panel in steel formwork. The magnets have very stromg adhesion properties resulting in a functional, long lasting solution. -
1.3T,2.5T, 5T, 10T Steel Recess Former Magnet For Anchor Fixing
Steel Recess Former Magnet is ideally designed for fixing lifting anchors on the side mould, instead of traditional rubber recess former screwing. The semi-sphere shape and the centre srew hole make it easy to take off from the concrete panel when demoulding. -
Steel Magnetic Triangle Chamfer L10x10, 15×15, 20×20, 25x25mm
Steel Magnetic Triangle Chamfer perfectly provide fast and accurate placement for creating beveled edges on the corners and faces of precast concrete wall panels in steel formwork construction. -
M16,M20 Inserted Magnetic Fixing Plate for Embedded Socket Fixing and Lifting System
Inserted Magnetic Fixing Plate is designed for fixing embedded threaded bushing in precast concrete production. The force can be 50kg to 200kgs, suitable for special requests on the holding force. Thread diameter can be M8,M10,M12,M14,M18,M20 etc. -
350KG, 900KG Loaf Magnet for Precast Steel Rails or Plywood Shuttering
Loaf Magnet is one kind of shuttering magnet with shape of bread. It's used to suit steel rail mould or plywood shuttering. The addtional universal adaptor can support the loaf magnets to connect the side mould firmly. It's easy to remove the magnets into position by a special release tool. -
1T Type Stainless Steel Shell Shuttering Magnet with 2 Notches
1T type stainless steel shell shuttering magnet is a typical size for light sandwich pc elements production. It's suitable for 60-120mm thickness side mould height. The outer 201 stainless steel house and button can resist the corrosion from the concrete. -
0.9m Length Magnetic Side Rail with 2pcs Integrated 1800KG Magnetic System
This 0.9m length magnetic side rail system, is consist of a steel formwork profile with 2pcs integrated 1800KG force magnetic tension mechanism, which can be used in different formwork construction. The centre designed hole is specially for the robot handling production of respectively double walls. -
0.5m Length Magnetic Shuttering Profile System
Magnetic Shuttering Profile System is a functional combination of shuttering magnets and steel mould. Normally it can be used by robot handling or manual working. -
1800KG Shuttering Magnets with On/Off Button for Prefabricated Building Formwork System
1800KG Shuttering Magnet is a typical box magnet for fixing precast mould in concrete production. Due to the powerful rare earth neodymium magnet, it can hold the mould on the table firmly. It's widely used in steel formwork or plywood mould. -
450KG Box Magnets with Push-pull Button
450Kg type box magnet is a small size of magnetic system for fixing sidemold on precast concrete table. It used to produce light precast concrete panel as 30mm to 50mm thickness.