-
Rubber Magnetic Chamfer Strips
Rubber Magnetic Chamfer Strips are molded out to make chamfers, beveled edges, notches and reveals on the side edege of precast concrete elements, especially for prefabricated pipe culverts, manholes, with featuring more light and flexible. -
Precast Concrete Push Pull Button Magnets with Sided Rods, Galvanized
Precast concrete push/pull button magnet with sided rods are used to attach on precast mold steel frame directly, without any other adapters. The two side d20mm rods are perfect for magnets to hang on the concrete side rail, no matter one side or both side holding for the combination of rails. -
Magnetic Holder for Corrugated Metal Pipe
This kind of Pipe magnet with rubber plated is typically used for fixing and holding metal pipe in the precasting. Compared to metal inserted magnets, the rubber cover can offer great shearing forces from sliding and moving. The tube size ranges from 37mm to 80mm. -
Trapezoid Steel Chamfer Magnet for Pre-stressed Hollow Core Panels
This trapezoid steel chamfer magnet is produced for our clients to make chamfers in the production of Prefabricated hollow slabs. Due to the inserted powerful neodymium magnets, the pulling-off force of each 10cm length could reach 82KG. The length is customized at any size. -
Shuttering Magnets with Adapter
Shuttering Magnets Adapters used to fasten the shuttering box magnet with precast side mold tightly for shearing resistance after concrete pouring and vibrating on the steel table. -
Switchable Box-outs Magnets with Bracket for Precast Aluminum Framework
Switchable Box-outs Magnets are normally used for fixing steel side forms, wooden/plywood frame on the mold table in the prefabricated concrete production. Here we designed a new bracket to match customer's Aluminum profile. -
900KG, 1Ton Box Magnets For Precast Tilting Table Mould Fixing
900KG Magnetic Shuttering Box is a popular sized magnetic system for precast panel wall production, both of wooden and steel side mould, composed with carbon box shell and a set of neodymium magnetic system. -
Shuttering Magnets, Precast Concrete Magnets, Magnetic Formwork System
Shuttering Magnets, also named Precast Concrete Magnets, Magnetic Form-work System, is typically designed and manufactured for positioning and fixing form-work side rail profile in processing of precast elements. The integrated neodymium magnetic block could hold the steel casting bed tightly. -
Magnetic Clamps For Precast Side-Form System
This stainless steel magnetic clamps are typical for precast plywood form-work and Aluminum profile with adapters. The welded nuts could be nailed to the targeted side form easily. It's designed with a special handle to release the magnets. No extra lever required. -
Inserted Magnetic Pin for Lifting Anchor Rubber Basement
Inserted Magnetic Pin is magnetic fixture clamp for fixing spread anchor rubber basement on the steel platform. The integrated powerful permanent neodymium magnets could be in high performance against rubber basement moving. Quite easier to install and uninstall than traditional bolting and welding. -
U Shape Magnetic Shuttering Profile, U60 Formwork Profile
U Shape Magnetic Shuttering Profile System consist of metal channel house and integrated magnetic block system in couples, ideally for precast slab wall panel production. Normally the thickness of slab panel is 60mm, we also called this type profile as U60 shuttering profile. -
1350KG, 1500KG Type of Magnetic Formwork System
1350KG or 1500KG type magnetic formwork system with carbon steel shell is also a standard power capacity type for precast plateform fixing, which is highly recommended to use for fixing sidemould in precast concrete sandwich panels. It can fits well on steel formwork or wooden plywood formwork.